• Search
  • Sell your Assets

  • Through its parent company Tekmart International, SMTBid has years of experience in dealing with customers from across the globe. SMTBid knows that no two companies are completely alike, therefore, we offer our customers a personalized way of doing business. No matter what country your business is located in, we have the experience and the know-how to get you the best result.

  • Current Auctions
  • No current auctions!
  • Upcoming Auctions
  • No upcoming events scheduled!
  • Available now at Tekmart International

  • Tekmart International Inc is a leading global supplier of quality secondhand SMT/Thru-Hole & Test equipment to the electronic manufacturing industry worldwide.


    Click on manufacturer to filter:

    3M  ABO  AccuDrop  ADVANTEST  Agilent  Asscon  ASTRO  Asymtek  Blue-M/TPS   BTU  Dek  DEN-ON (ZUNO)  E&C  ECG  EIDEN  Electrovert  Fluke  FUJI  GEFEN  Gryphon Corporation  HAKKO   HAMAMATSU  HANWA ELECTRONIC  Heller  HIOKI  HOCHIKI  INSTEK  IWATSU  KANON  KEYENCE  KIKUSUI  LEADER  Macrotron Systems Inc  MALCOM  Marantz Electronics LTD  MATSUNAGA  McDry Cabinets  Minami Eng. Co. Ltd.  MINOLTA  Mitutoyo  MPM  MUNEKATA  Mydata  NIPPON ANTENNA  NIX  NOISEKEN  OMRON  ONSOKU  Orbotech  Panasonic  PROSIDE  PSC  QUADTECH  Seika  SENCORE  Senju  Sensbey  Shibasoku  Siemens  SMIC  SONY  SUN MICROSYSTEMS  TAKASAGO  Team Corporation  TEKMART  Teradyne  Thermal Product Solutions  Toyo Living Co. LTD  TYCO [ASG]  Universal  VICTOR  Vitronics  WALKER  WILL TEK  XILINX  YOKOGAWA 


    • Siemens_Siplace 80 S20
    • Siemens Siplace 80 S20;  Type: chip shooter
      Siemens Siplace 80 S201999 VintageSingle LaneLeft-to-Right FlowTekmart California Warehouse Number of Placement Heads:- 2 Revolver Heads (Vertical). Number of Gantries: 2 Placement Rate:- Max 20,000 components per hour Placement Accuracy:90 m, 4 Sigma, 67.5 m, 3 Sigma Component Vision System:- For component recognition. PCB Vision System:- For PCB and bad board marking recogniton. Range of Components:- 0402 - LCC 44, inclusive DRAM, BGA, CSP Component Height:- Max. 6 mm Component Feeder Capacity:- 2 feederstations at each side Feeder Type:- Tape feeders (8 - 32 mm), Stick feeders, Bulk feeders PCB Transport:- Inline transport- Width adjust for PCB's - 50mm x 50mm to 460mm x 460mmm PCB Changeover Time: 2.5 sec
    • Siemens_Siplace S25HM
    • Siemens Siplace S25HM;  Type: chip shooter
      PCB flow: Left to Right Siemens Siplace 80 S25 HMVintage 2000SN# 450-1200110012/12 RV head- Siplace Pro 5.22- Siplace Explorer- 18' long board option- Station PC OS: Windows NT2x Feeders Tables IncludedComponent table calibration jig: 1 pcsPneumatic waste tape cutterNozzles changers availableCE-Marked, Made in Germany
    • Siemens_Siplace S25HM
    • Siemens Siplace S25HM;  Type: chip shooter
      Siemens Siplace 80 S25 HMVintage 2000SN#731-12007713PCB flow: Right to Left6/12 RV head- Siplace Pro 5.22- Siplace Explorer- 18' long board option- Station PC OS: Windows NT2x Feeders Tables Included- Pneumatic component tables: 2 pcs- Component table calibration jig: 1 pcs- Pneumatic waste tape cutter- CE-Marked, Made in Germany
    • Siemens_Siplace S25HM
    • Siemens Siplace S25HM;  Type: chip shooter
      PCB flow: Right-to-LeftSiemens Siplace 80 S25 HMVintage 2000SN# 730-1200769712/12 RV head- Siplace Pro 5.22- Siplace Explorer- 18' long board option- Station PC OS: Windows NT2x Feeders Tables IncludedComponent table calibration jig: 1 pcsPneumatic waste tape cutterNozzles changers availableCE-Marked, Made in Germany
    • SUN MICROSYSTEMS_SUN X2200 M2
    • SUN MICROSYSTEMS SUN X2200 M2;  Type: other equipment
      SunFire X2200 M2***Great Condition*** 2 x 2.6GHZ GHZ AMD (2218) OPTERON DUAL CORE PROCESSORS 4GB of memory installed 4 x 1GB2 250GB Serial ATA (SATA) Hard drives installed   Power Supply installed 2 x PCIE Slots(1 PCIe Rear COVER MISSING) Summary SpecificationsProcessor' Up to two Quad-Core AMD Opteron processors (23xx) or 2 Dual Core Opteron Processors (22xx)Main memory' Up to 64 GB (16x 4 GB) of DDR2 667 MHzECC Registered memory' System configurations from 4 GB to 64 GBSystem architecture' Based on AMD Opteron processor architecture' Two-socket, quad-core or Dual Core system ' up to eightcores totalStandard integrated interfaces' Network: Four 10/100/1000 Base-TEthernet ports' Network Management: One 10/100/1000Base-T Gigabit Ethernet port throughshared access to one of the four systemEthernet ports' Serial: One DB9 port' SATA: Two-channel SATA II interface,internal only' USB: Six USB 2.0 ports (two front andfour rear)Expansion busRiser card assembly with option of:' 2x internal 8-lane PCI Express slots, or' 1x internal 16-lane PCI Express slot
    • SMIC_SDS-5N
    • SMIC SDS-5N;  Type: wave solder
      Lead-free Solder Recycling SystemEfficiently separates solder in the solder dross, which tends to increase, from oxides.Solder dross separation method:Specially-processed sesame (E-Sesame) is mixed with dross, and after heating and agitation, solder is separated from oxides.Separated solder is put in a simple mold to make bar solder for reuse.Separation efficiency: Approx. 90% of solder can be recycled!!Height: 1000 mm. Lenght: 800 mm.  Width: 650 mm.Weight: 130 KgPower capacity: AC100V, 1200W, 15A
    • Senju_Pb-Free Selective Wave
    • Senju Pb-Free Selective Wave;  Type: wave solder
      SENJU (SMIC) Lead-Free Selective Wave SolderModel: MPF-2300Suitable for soldering: - Multiple-layered high-heat capacity PCB - High heat capacity modules- Narrow pitched connector- High heat capacity conncetots - Sealed case unitsFeatures:- Local soldering with large and small nozzles mixed together- SPF technology prevents the occurrence of tin corrosion inside solder bath.- Automatic operation is available by reading data on memory (including soldering conditions)Functional units:- Loading/Unloading conveyor- Fluxer unit- Fluxer preheating unit- Solder bath- Transfer rail           Dimensions: 3070L x 1150W x 1650H mmPass-line:   900H20mmBoard dimensions:  80W x 80L  - 250W x 330LSolder capacity:  ECOSOLDER M705E 700KgController:  Sequential control OmronPower Supply:  3-Phase AC200V 19KVAWeight:  2200KgThis Selective Solder Line Includes:-  PCB Unloader    SUD-120-  PCB Loader    SLD-120-  Conveyor    SMC-2250-  Conveyor    SMC-2250-  Conveyor    SNBC-500-  Conveyor    SRB-600-  Conveyor    SNBC-500-  Conveyor    SMC-200
    • Senju_SNR-725
    • Senju SNR-725;  Type: reflow oven
       ModelSNR-725 Vintage2004 MAY Run Hours39341.9 PCB FlowL-R  # Heating Zones7 top/7 bottom # Cooling Zones2 top/2 bottom AirYES Nitrogen CAPABLE Edge RailFRONT Mesh BeltN/A Center Rail SupportNo Auto-OilerYES Pb-FreeYES UPSYESDimensions: 5,340 mm (L) x 1,143 mm (W) x 1,385 mm (H)Conveyor speed: 0.3 to 2.0 m/min. (Variable) Pass line 90020 mm, in-line design available Heater system: Far-infrared panel heaters and hot air blowers used in combination (14 units in 7 heating zone for SNR-725)Cooling unit Top-and-bottom cold blast cooling by coolant circulation Power supply (Max.): 200 VAC, 40kW, three-phase PCB access Width: 50 to 250 mm Length: 100 to 400 mm  PCB access height Upper side: 10 mm, Underside: 5 mm (Variable) Operation control: Microcomputer Weight: 1,800 kg FeaturesAn airtight muffle structure maintains an uniform oxygenconcentration of 100 ppm or less.Low nitrogen gas consumption (100 ppm at 300 l/min.) has beenachieved in every zone of the oven.(option)Porous ceramic, far-infrared radiation and -flow heating system,all combined, achieve a minimized Delta T  .The standard model comes with an automatic flux recovery system.High-efficiency adiabatic structure saves power consumption.(35kW for 7 zones)High degree of freedom in profile setting.Available for high temp. reflowmax. 350 . . .
    • Senju_SNR-825
    • Senju SNR-825;  Type: reflow oven
       ModelSNR-825 Vintage2007 FEB Run Hours PCB FlowL-R MODEL VERSIONS-3.20 # Heating Zones8 top/8 bottom # Cooling Zones2 top/2 bottom AirYES Nitrogen CAPABLE Edge RailFRONT Mesh BeltN/A Center Rail SupportNO Auto-OilerNO Pb-FreeYES UPSYESDimensions: (mm) 5,300L x 1,240W x 1,500H Conveyor speed: 0.3 to 1.6 m/min. (Variable) Pass line: 900 20mm Heater system: Far infrared panel heaters and hot air blowers used in combined(16 units 8 heating zones) Power supply: 3 phase 200V 48kW Cooling unit: Top-and-bottom cold blast cooling by coolant circulation 1 zone. PCB access: Width:50 to 250mm, Length:100 to 400mm PCB access: height Upper:10 mm, Under:5 mm Operation control: PLC + PC controlled SNR-825Dimensions: (mm) 5,300L x 1,240W x 1,500H Conveyor speed: 0.3 to 1.6 m/min. (Variable) Pass line: 900 20mm Heater system: Far infrared panel heaters and hot air blowers used in combined(16 units 8 heating zones) Power supply: 3 phase 200V 48kW Cooling unit: Top-and-bottom cold blast cooling by coolant circulation 1 zone. PCB access: Width:50 to 250mm, Length:100 to 400mm PCB access height: Upper:10 mm, Under:5 mm Operation control: PLC + PC controlled Options: ECO-operation mode, PCB warp prevention mechanism, Automatic conveyor width adjuster, In-Out feeder, Chiller unit, Labyrinth air curtain, Thermal profiler, . . .
    • Senju_SPF-300
    • Senju SPF-300;  Type: wave solder
      Senju Lead Free Wave SPF-300 Dual Wave SolderNo NitrogenNo Top Preheat Zones355mm Max PCB width3x Bottom Radiant Preheat ZonesSPF-300 Standard SpecificationThe latest stable pressure flow soldering machineis most suitable for high quality lead-free soldering.Eliminating a use of stabilizing plate enables smooth and stable wave forbest soldering process with easy maintenance.High flow pressure provides sufficient solder in through-holes of multilayerboards and significantly reduces missing solders and bridges.Suitable for high thermal capacity devices allowing sufficient heat supply forsoldering.Flow height can be easily set and maintained at 15mm or above.Vertical adjustment of the conveyer rail provides flexibility and allows easycleaning of the top without removal.Soldering process is visible through glass hood for better monitoring purpose.Standard touch panel operation allows changing among Japanese, English,or Chinese. Lead Free Wave with Fluxer Ready for production
    • Senju_SPPII-300
    • Senju SPPII-300;  Type: wave solder
      Dual Wave SystemNo NitrogenNo Top Preheat Zones355mm Max PCB widthExternal FluxerBuilt-in Spray Fluxer.Built-in Air conditioner to cool the board.3x Bottom Preheat Zones: 1XRADIANT PREHEAT ZONE + 2XFORCED CONVERTION PREHEAT ZONES  ECO-MASTER with SSF-400 Spray Fluxer
    • Senju_SPF-300
    • Senju SPF-300;  Type: wave solder
      Senju Lead Free Wave SPF-300 Dual Wave SystemNo NitrogenNo Top Preheat Zones355mm Max PCB width3 bottom radiant preheat zonesSPF-300 Standard SpecificationThe latest stable pressure flow soldering machineis most suitable for high quality lead-free soldering.Eliminating a use of stabilizing plate enables smooth and stable wave forbest soldering process with easy maintenance.High flow pressure provides sufficient solder in through-holes of multilayerboards and significantly reduces missing solders and bridges.Suitable for high thermal capacity devices allowing sufficient heat supply forsoldering.Flow height can be easily set and maintained at 15mm or above.Vertical adjustment of the conveyer rail provides flexibility and allows easycleaning of the top without removal.Soldering process is visible through glass hood for better monitoring purpose.Standard touch panel operation allows changing among Japanese, English,or Chinese. Lead Free Wave with Fluxer Ready for production
    • Sensbey_ILF-350E8 Pb-Free Wave
    • Sensbey ILF-350E8 Pb-Free Wave;  Type: wave solder
      Sensbey 2004 Model Fully Loaded with All Options (refer to generic specs)PCB size: 60 - 350mm(max.) PCB length:  120 - 400mm(max.) Automatic conveyor  width adjustment systemFinger Cleaner &  Nitrogenous surface treatment for solder pot Solder flow system(ELMAN flow): Electromagnetic  pump direct flow solder pot 1st nozzle: wide nozzle (wave width 30mm, 4-holelines) 2nd  nozzle: exterior manual nozzle adjustmentSolder pot:  Motorized Up/Down & Roll-in/Out  SPECIFIC CONFIGURATION FEATURES:1.) Solder Pot roll out is motorised whereas the Width adjustment is manual. The motorised roll out adjustment provides ease of maintenance.2.) The machine has the industries best Conveyor ( with rugged Clamps ) System.3.) The Preheater is 1.5 m with tunnel for best preheat as required by most No-Clean Fluxes.4.) The Spray Fluxer is designed for saving the Flux consumed. Spray fluxer saves approx. 60% Flux. Further there is also no need to add thinner or maintain the Flux Specific Gravity as the Flux is dispensed directly on the board from the Main Flux Container w/o any recirculation or exposure to environment.5.) Post Soldering Cooling system is provided on the machine.6.) All the Width Lead Screws are covered with Telescopic Cover to avoid any exposure to contamination from Flux or Dross 7.) Touch Screen . . .
    • Senju_SPDII-300
    • Senju SPDII-300;  Type: wave solder
      Flow Direction: Left to Right.PCB size: W: 50(300mm), L:100(350mm)Mixed soldering if chip/discrete componentPass line height: 920mmThe entrance height is adjusted to the work conveyor height.Wrap protection blade (entrance & exit)Pre-heater (Far Infrared panel Heater)Solder bath: Double wave system.Spot cooler (up and down nozzles), air adjustment.PCB angle setting: 5 degreePull out Solder Bath by rotary handleSolder Capacity: 400kgEntrance/ exit Conveyor.Total length: 3494mm.Built-in Spray Fluxer.Built-in Air conditioner to cool the board.